The range of parameters: 15 specifications (400... 1000) The output torque: 87.5... 1700 KN M Length: 1630... 4100mm Speed down ratio: 8... 315 Product features: Solid low speed shaft, an important application with special accessories. Shaft bearing stiffness is very high, can guarantee that bears most of the load. Rigidity and precision are very high ductile cast iron or steel body, and internally or externally provided with reinforcing ribs. The best choice of gear modulus, geometric optimization, improve product precision (with bevel gear also after grinding or scraping). High efficiency, low noise. A total of 54 types, all specifications are enhanced, have a non-return device, approximately 14% performance increase than the standard type Setting makes the reducer can use scroll type novel installation; reducer can with double extension type input shaft and the output shaft, backstop, bearing lubrication pump, oil heater, oil standard remote indicator, oil temperature gauge, bearing the thermometer, extruder design, dual motor drive design (BMI of second speed or the speed of the motor design); Attachments: fan and coil or heat exchanger (oil / gas exchange or oil / water exchange) |